Contour-accurate logo printing: the print of your motif within the imprint area is applied exactly according to its outlines, so the design seamlessly integrates into the tent material
Print area size:
Roof part: each 115 x 55 cm (W x H)
Valance: each 180 x 25 cm (W x H)
Tent fabric
Tent fabric waterproof up to a water column of 1000 mm, rainproof seams
Cleaning with a damp cloth possible
Valance equipped with Velcro tape, optionally completable with tent walls in base colors or fully printed tent walls (different materials - deviations in color effect & processing); tent walls equipped with side zippers - high wind and weather protection
Notes:
Design note:
To ensure your logo or motif stands out well on the tent, the chosen colors should clearly contrast with the tent color. Therefore, pay attention to the base color of your tent. With similar color tones, such as white design on a white tent or red design on a red tent, the print may be difficult to recognize later. For optimal visibility, we recommend strong color contrasts between the motif and tent color.
Gentle cleaning: Do not use aggressive cleaning agents or mechanical tools such as high-pressure cleaners in the print area when cleaning the tent.
For transport and storage of pop-up tents, the tent roofs must always be removed from the frame.
When used outdoors, pop-up tents and pop-up pavilions must always be securely anchored to the ground.
Use the additionally available tensioning sets as well as stackable ballast plates, weights, and ground anchors to stabilize the tent posts.
Pop-up tents and pop-up pavilions are not suitable for long-term or unattended outdoor use.
Pop-up tents and pop-up pavilions are not tested for wind and snow loads.
Pop-up pavilions with logo print can be combined with fully printed tent walls. However, due to different materials and printing processes, differences in color effect and processing may occur.
Frame
Posts made of sturdy square profiles from powder-coated steel, white (30 x 30 mm, wall thickness 0,8 mm)
Joint connectors and tent feet made of robust ABS plastic (frost-proof, impact-resistant)
Passage height adjustable in 3 steps (195 cm, 205 cm, 215 cm)
Stable, foldable scissor lattice system made of steel, locking with lever (spring mechanism)
Total height approx. 340 cm (height adjustment step 3)
Base area 300 x 300 cm (9 m²)
Weight (without printed parts): 20 kg
Frame
Posts made of high-quality, sturdy hexagonal profiles from powder-coated steel, beige with hammered finish (top: ø 40 mm, bottom: ø 36 mm, wall thickness 1 mm)
Joint connectors made of glass fiber reinforced plastic (high strength, weather-resistant, frost-proof)
Feet made of robust steel
Passage height adjustable in 4 steps (189 cm, 197 cm, 205 cm, 213 cm)
Especially stable, foldable scissor lattice system made of steel, locking with lever
Crank mechanism for fine adjustment and perfect tensioning of the roof
Total height approx. 335 cm (height adjustment step 3)
Base area 300 x 300 cm (9 m²)
Weight (without printed parts): 24 kg
Frame
Posts made of high-quality hexagonal profiles from aluminum (top: ø 40 mm, bottom: ø 36 mm, wall thickness 1,2 mm)
Joint connectors made of glass fiber reinforced plastic (high strength, weather-resistant, frost-proof)
Robust, stable feet made of aluminum
Passage height adjustable in 4 steps (189 cm, 197 cm, 205 cm, 213 cm)
Especially stable, foldable scissor lattice system made of aluminum, locking with lever
Crank mechanism for fine adjustment and perfect tensioning of the roof
Total height 335 cm (height adjustment step 3)
Base area 300 x 300 cm (9 m²)
Weight (without printed parts): 17 kg
Frame
High-quality, extra-strong aluminum frame
Posts made of very sturdy octagonal profiles (top: ø 52 mm, bottom: ø 45 mm, wall thickness: 1,5 mm)
Robust, stable feet made of aluminum
Connectors made of robust, glass fiber reinforced plastic (high strength, weather-resistant, frost-proof)
Passage height adjustable in 5 steps (189 cm, 197 cm, 205 cm, 213 cm, 221 cm)
Especially stable, foldable scissor lattice system, locking with lever
Crank mechanism for fine adjustment and perfect tensioning of the roof
We provide you with suitable layout templates and helpful tips for creating print data so that your desired product is created exactly according to your ideas. Please observe the respective specifications in order to prepare your data correctly for production and achieve optimum printing results.
Please upload your print data to your customer account after placing your order.
Good to know: You can cancel your order online free of charge until production begins.
Recently Viewed Products
Leider verwenden Sie einen veralteten Browser, der von unserem Online-Shop nicht mehr unterstützt wird. Damit Sie die Vispronet® Produkte erleben können, empfehlen wir Ihnen, in einen aktuellen Browser zu wechseln.Malheureusement, vous utilisez un navigateur obsolète qui n'est plus pris en charge par notre boutique en ligne. Pour que vous puissiez découvrir les produits Vispronet®, nous vous recommandons de passer à un navigateur plus récent.Unfortunately, you are using an outdated browser that is no longer supported by our online store. In order for you to experience Vispronet® products, we recommend that you switch to an up-to-date browser.Bohužel používáte zastaralý prohlížeč, který již náš internetový obchod nepodporuje. Abyste mohli využívat produkty Vispronet®, doporučujeme vám přepnout na aktuální prohlížeč.
Google Chrome Browser
Microsoft Edge Browser
Mozilla Firefox Browser
Safari Browser
Opera Browser
Vivaldi Browser
from to {customerPrice}{customerTaxText}, plus shipping costs
